Valid NGFW-Engineer Exam Tips, Exam NGFW-Engineer Forum

We provide Palo Alto Networks NGFW-Engineer exam product in three different formats to accommodate diverse learning styles and help candidates prepare successfully for the NGFW-Engineer exam. These formats include NGFW-Engineer web-based practice test, desktop-based practice exam software, and Palo Alto Networks Next-Generation Firewall Engineer (NGFW-Engineer) pdf file. Before purchasing, customers can try a free demo to assess the quality of the Palo Alto Networks NGFW-Engineer practice exam material.

Palo Alto Networks NGFW-Engineer Exam Syllabus Topics:

Topic	Details
Topic 1	PAN-OS Device Setting Configuration: This section evaluates the expertise of System Administrators in configuring device settings on PAN-OS. It includes implementing authentication roles and profiles, and configuring virtual systems with interfaces, zones, routers, and inter-VSYS security. Logging mechanisms such as Strata Logging Service and log forwarding are covered alongside software updates and certificate management for PKI integration and decryption. The section also focuses on configuring Cloud Identity Engine User-ID features and web proxy settings.
Topic 2	PAN-OS Networking Configuration: This section of the exam measures the skills of Network Engineers in configuring networking components within PAN-OS. It covers interface setup across Layer 2, Layer 3, virtual wire, tunnel interfaces, and aggregate Ethernet configurations. Additionally, it includes zone creation, high availability configurations (active active and active passive), routing protocols, and GlobalProtect setup for portals, gateways, authentication, and tunneling. The section also addresses IPSec, quantum-resistant cryptography, and GRE tunnels.
Topic 3	Integration and Automation: This section measures the skills of Automation Engineers in deploying and managing Palo Alto Networks NGFWs across various environments. It includes the installation of PA-Series, VM-Series, CN-Series, and Cloud NGFWs. The use of APIs for automation, integration with third-party services like Kubernetes and Terraform, centralized management with Panorama templates and device groups, as well as building custom dashboards and reports in Application Command Center (ACC) are key topics.

>> Valid NGFW-Engineer Exam Tips <<

Exam Palo Alto Networks NGFW-Engineer Forum & Real NGFW-Engineer Dumps Free

There are three different versions of our NGFW-Engineer study guide which are PDF, Software and APP online versions. For their varied advantages, our NGFW-Engineer learning questions have covered almost all the interests and habits of varied customers groups. No matter you are a student, a working staff, or even a house wife, you will find the exact version of your NGFW-Engineer Exam Materials to offer you a pleasant study experience.

Palo Alto Networks Next-Generation Firewall Engineer Sample Questions (Q26-Q31):

NEW QUESTION # 26
Which CLI command is used to configure the management interface as a DHCP client?

A. set deviceconfig management type dhcp-client
B. set deviceconfig system type dhcp-client
C. set network dhcp type management-interface
D. set network dhcp interface management

Answer: A

Explanation:
To configure the management interface as a DHCP client on a Palo Alto Networks NGFW, the correct CLI command is set deviceconfig management type dhcp-client.
This command configures the management interface to obtain an IP address dynamically using DHCP.

NEW QUESTION # 27
How does a Palo Alto Networks NGFW respond when the preemptive hold time is set to 0 minutes during configuration of route monitoring?

A. It accepts the configuration but throws a warning message.
B. It does not accept the configuration.
C. It removes the static route because 0 is a NULL value
D. It reinstalls the route into the routing information base (RIB) as soon as the path comes up.

Answer: D

Explanation:
When the preemptive hold time is set to 0 minutes in route monitoring, the firewall is configured to immediately reinstall the route into the Routing Information Base (RIB) as soon as the monitored path comes up. This essentially means that the firewall will not wait for any predefined hold time before reestablishing the route once the monitoring condition is met, ensuring a faster recovery of the route.

NEW QUESTION # 28
Which statement applies to Log Collector Groups?

A. Enabling redundancy increases the log processing traffic in a Collector Group by 50%.
B. In any single Collector Group, all the Log Collectors must run on the same Panorama model.
C. The maximum number of Log Collectors in a Log Collector Group is 18 plus two hot spares.
D. Log redundancy is available only if each Log Collector has the same amount of total disk storage.

Answer: C

Explanation:
The maximum number of Log Collectors that can be added to a Log Collector Group is 18 plus 2 hot spares, ensuring redundancy and availability in case of failure. This allows for a total of up to 20 Log Collectors in a group, providing sufficient scalability and reliability for log collection.

NEW QUESTION # 29
Which statement describes the role of Terraform in deploying Palo Alto Networks NGFWs?

A. It acts as a logging service for NGFW performance metrics.
B. It provides Infrastructure-as-Code (IaC) to automate NGFW deployment.
C. It orchestrates real-time traffic inspection for network segments.
D. It manages threat intelligence data synchronization with NGFWs.

Answer: B

Explanation:
Terraform is an Infrastructure-as-Code (IaC) tool that automates the provisioning and management of infrastructure resources, including Palo Alto Networks Next-Generation Firewalls (NGFWs). By using Terraform configuration files, administrators can define and deploy NGFW instances across cloud environments (such as AWS, Azure, and GCP) efficiently and consistently.
Terraform enables:
Automated firewall deployment in cloud environments.
Configuration of security policies and networking settings in a declarative manner.
Scalability and repeatability, reducing manual intervention in firewall provisioning.

NEW QUESTION # 30
For which two purposes is an IP address configured on a tunnel interface? (Choose two.)

A. Tunnel monitoring
B. Redistribution of User-ID
C. Use of dynamic routing protocols
D. Use of peer IP

Answer: A,C

Explanation:
Use of dynamic routing protocols: An IP address is needed on the tunnel interface to participate in dynamic routing protocols (like OSPF, BGP, etc.) over the tunnel. This allows the firewall to advertise routes and receive updates over the tunnel.
Tunnel monitoring: The IP address on the tunnel interface can also be used for monitoring the tunnel's status. Tunnel monitoring (such as IPSec tunnel monitoring) requires an IP address on the tunnel interface to check the health and availability of the tunnel.

NEW QUESTION # 31
......

ExamDumpsVCE has many Palo Alto Networks Next-Generation Firewall Engineer (NGFW-Engineer) practice questions that reflect the pattern of the real Palo Alto Networks Next-Generation Firewall Engineer (NGFW-Engineer) exam. ExamDumpsVCE allows you to create a Palo Alto Networks Next-Generation Firewall Engineer (NGFW-Engineer) exam dumps according to your preparation. It is easy to create the Palo Alto Networks NGFW-Engineer Practice Questions by following just a few simple steps. Our Palo Alto Networks Next-Generation Firewall Engineer (NGFW-Engineer) exam dumps are customizable based on the time and type of questions.

Exam NGFW-Engineer Forum: https://www.examdumpsvce.com/NGFW-Engineer-valid-exam-dumps.html

Steve Sanders Steve Sanders

Biography

Valid NGFW-Engineer Exam Tips, Exam NGFW-Engineer Forum

Palo Alto Networks NGFW-Engineer Exam Syllabus Topics:

Exam Palo Alto Networks NGFW-Engineer Forum & Real NGFW-Engineer Dumps Free

Palo Alto Networks Next-Generation Firewall Engineer Sample Questions (Q26-Q31):

Quick Links

Resources

Support