ANS-C01퍼펙트덤프데모문제보기 & ANS-C01시험합격덤프

참고: DumpTOP에서 Google Drive로 공유하는 무료, 최신 ANS-C01 시험 문제집이 있습니다: https://drive.google.com/open?id=1DmWk_TvPu0rZAskj2wUGgcUlOAiKH_xk

DumpTOP는 엘리트한 전문가들의 끊임없는 연구와 자신만의 노하우로 Amazon ANS-C01덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다. 기존의 Amazon ANS-C01시험문제를 분석하여 만들어낸 Amazon ANS-C01덤프의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. Amazon ANS-C01덤프는 합격보장해드리는 고품질 덤프입니다. DumpTOP의 덤프를 장바구니에 넣고 페이팔을 통한 안전결제를 진행하여 덤프를 다운받아 시험합격하세요.

Amazon ANS-C01 시험을 통과하려면, 후보자들은 AWS에서 고급 네트워킹 솔루션을 설계, 배포 및 문제 해결할 수 있는 능력을 입증해야 합니다. 또한, 네트워크 보안 위험을 식별하고 완화할 수 있어야 하며, 네트워크 작업을 자동화하고 네트워크 성능을 최적화할 수 있어야 합니다. 시험은 객관식과 다중 응답 문제로 이루어져 있으며, 후보자들은 170분 동안 시험을 완료해야 합니다. ANS-C01 자격증을 취득하는 것은 AWS 네트워킹 분야에서 전문성을 입증하고 경력을 발전시키고자 하는 네트워킹 전문가들에게 귀중한 자격증입니다.

ANS-C01 인증 시험은 AWS 네트워킹 개념, 보안, 연결성 및 라우팅을 포함한 광범위한 주제를 다룹니다. 또한 하이브리드 네트워킹, Direct Connect 및 VPN과 같은 고급 주제도 포함됩니다. 시험에 합격 한 응시자는 조직의 요구를 충족시키는 AWS에 복잡한 네트워크 솔루션을 설계하고 배포하는 능력을 보여줍니다.

>> ANS-C01퍼펙트 덤프데모문제 보기 <<

100% 유효한 ANS-C01퍼펙트 덤프데모문제 보기 공부자료

DumpTOP Amazon ANS-C01 덤프는Amazon ANS-C01실제시험 변화의 기반에서 스케줄에 따라 업데이트 합니다. 만일 테스트에 어떤 변화가 생긴다면 될수록 2일간의 근무일 안에Amazon ANS-C01 덤프를 업데이트 하여 고객들이 테스트에 성공적으로 합격 할 수 있도록 업데이트 된 버전을 구매후 서비스로 제공해드립니다. 업데이트할수 없는 상황이라면 다른 적중율 좋은 덤프로 바꿔드리거나 덤프비용을 환불해드립니다.

ANS-C01 시험을 응시하기 위해서는, 후보자는 최소 5년 이상의 네트워크 아키텍처 및 구현 경험, 이 중 최소 2년간의 AWS 경험을 보유해야 합니다. 또한 후보자는 TCP/IP, DNS, BGP와 같은 네트워킹 기술 및 프로토콜에 대한 견고한 이해력과 함께 네트워크 보안 및 모니터링 경험을 갖추어야 합니다.

최신 AWS Certified Specialty ANS-C01 무료샘플문제 (Q45-Q50):

질문 # 45
A company is building an internet-facing application that is hosted on an Amazon Elastic Kubernetes Service (Amazon EKS) cluster. The company is using the Amazon VPC Container Network Interface (CNI) plugin for Kubernetes for pod networking connectivity. The company needs to expose its application to the internet by using a Network Load Balancer (NLB). The pods that host the application must have visibility of the source IP address that is contained in the original packet that the NLB receives.
How should the network engineer configure the NLB and Amazon EKS settings to achieve these goals?

A. Specify the instance target type for the NLB. Set the externalTrafficPolicy attribute to Cluster in the Kubernetes service specification
B. Specify the instance target type for the NLB. Set the externalTrafficPolicy attribute to Local in the Kubernetes service specification.
C. Specify the Ip target type for the NLB. Set the externalTrafficPolicy attribute to Cluster in the Kubernetes service specification
D. Specify the Ip target type for the NLB. Set the externalTrafficPolicy attribute to Local in the Kubernetes service specification.

정답：D

질문 # 46
A Lambda function needs to access the private address of an Amazon ElastiCache cluster in a VPC. The Lambda function also needs to write messages to Amazon SQS. The Lambda function has been configured to run in a subnet in the VPC.
Which of the following actions meet the requirements?
(Select two.)
Response:

A. The ElastiCache server outbound security group rules must be configured to permit the Lambda function's security group.
B. The Lambda function must route through a NAT gateway or NAT instance in another subnet to access the public SQS API.
C. The Lambda function must consume auto-assigned public IP addresses but not elastic IP addresses.
D. The Lambda function needs an 1AM role to access Amazon SQS
E. The Lambda function must be assigned a public IP address to access the public Amazon SQS API.

정답：B,D

질문 # 47
An international company provides early warning about tsunamis. The company plans to use IoT devices to monitor sea waves around the world. The data that is collected by the IoT devices must reach the company's infrastructure on AWS as quickly as possible. The company is using three operation centers around the world. Each operation center is connected to AWS through Its own AWS Direct Connect connection. Each operation center is connected to the internet through at least two upstream internet service providers.
The company has its own provider-independent (PI) address space. The IoT devices use TCP protocols for reliable transmission of the data they collect. The IoT devices have both landline and mobile internet connectivity. The infrastructure and the solution will be deployed in multiple AWS Regions. The company will use Amazon Route 53 for DNS services. A network engineer needs to design connectivity between the IoT devices and the services that run in the AWS Cloud.
Which solution will meet these requirements with the HIGHEST availability?

A. Set up Route 53 latency-based routing. Add latency alias records. For the latency alias records, set the value of Evaluate Target Health to Yes.
B. Set up an accelerator in AWS Global Accelerator. Configure Regional endpoint groups and health checks.
C. Set up Bring Your Own IP (BYOIP) addresses. Use the same PI addresses for each Region where the solution is deployed.
D. Set up an Amazon CloudFront distribution with origin failover. Create an origin group for each Region where the solution is deployed.

정답：A

설명：
https://aws.amazon.com/blogs/iot/automate-global-device-provisioning-with-aws-iot-core-and- amazon-route-53/

질문 # 48
A financial company that is located in the us-east-1 Region needs to establish secure connectivity to AWS. The company has two on-premises data centers, each located within the same Region.
The company's network team needs to establish hybrid connectivity to its AWS environment with reliable and consistent connectivity.
The connection must provide access to the company's private resources inside its AWS environment. The resources are located in the us-east-1 and us-west-2 Regions. The connection must allow resources from the corporate networks to send large amounts of data to Amazon S3 over the same connection. To meet compliance requirements, the connection must be highly available and must provide encryption for all packets that are sent between the on-premises location and any services on AWS.
Which combination of steps should the network team take to meet these requirements? (Choose two.)

A. Set up an AWS Direct Connect connection from one of the company's data centers to us-east-1 and us-west-2.
B. Set up a transit VIF for an AWS Direct Connect gateway to send data to Amazon S3. Create a transit gateway. Associate the transit gateway with the Direct Connect gateway to provide secure communications from the company's data centers to the VPCs in us-east-1 and us-west-2.
C. Set up an AWS Direct Connect connection to each of the company's data centers.
D. Set up a private VIF to send data to Amazon S3. Use an AWS Site-to-Site VPN connection over the private VIF to encrypt data in transit to the VPCs in us-east-1 and us-west-2.
E. Set up a public VIF to send data to Amazon S3. Use an AWS Site-to-Site VPN connection over the public VIF to encrypt data in transit to the VPCs in us-east-1 and us-west-2.

정답：C,E

설명：
https://docs.aws.amazon.com/vpn/latest/s2svpn/Examples.html

질문 # 49
Which components are required in order to create an AWS Managed Hardware VPN?
(Choose two.)
Response:

A. Virtual Private Gateway
B. Internet Gateway
C. Customer Gateway
D. NAT Gateway

정답：A,C

질문 # 50
......

ANS-C01시험합격덤프: https://www.dumptop.com/Amazon/ANS-C01-dump.html

참고: DumpTOP에서 Google Drive로 공유하는 무료, 최신 ANS-C01 시험 문제집이 있습니다: https://drive.google.com/open?id=1DmWk_TvPu0rZAskj2wUGgcUlOAiKH_xk

Emma Hughes Emma Hughes

Biography

ANS-C01퍼펙트덤프데모문제보기 & ANS-C01시험합격덤프

100% 유효한 ANS-C01퍼펙트 덤프데모문제 보기 공부자료

최신 AWS Certified Specialty ANS-C01 무료샘플문제 (Q45-Q50):

Quick Links

Resources

Support